Residential PoE IP Intercom Door Station


The INTIPRDSG is a single channel video intercom solution ideal for homes and single-premises buildings. This door station features a 2.0MP camera, all in a stylish aluminium weather and vandal resistant body.

Product features:
• 1/2.8’’ 2.0MP 1.95mm lens camera with 160° FOV
• Built-in microphone and speaker for 2-way talk
• Connect with intercom monitor(s) via Ethernet
• Alarm and RS485 input/output relays
• Intuitive, easy-to-use interface
• Weather and vandal resistant IP55/IK07 aluminium body
• Power via 12VDC or Power over Ethernet (802.3af)
• Flush and surface mount installation options

* We recommended that Door Stations are mounted in a sheltered location, not exposed directly to weather, as only the front plate is weather resistant.
* When installing the Door Station, apply outdoor silicone sealant between the Door Station & the wall, & seal the hole that has been created for the cable to prevent water ingress. If using a mounting box, ensure the box is sealed, & the included waterproof rubber seals are used when installing the screws.

*2-Wire connection requires the INTIPPOE2W. Note it is one device per terminal (6 total).
App Connection QR Code
Audio / 2-Way Talk Omni-directional Microphone & Embedded Loudspeaker for 2-way talk
Button Illumination None
Camera System 2.0 Megapixel CMOS camera with 1.95mm lens (Horizontal FoV: 160°), WDR
Card Support N/A
Construction Aluminium
Dimensions 130 x 96 x 29mm
Ethernet / Network N/A
Ingress Protection IP55
Input / Output 1 x alarm input / 1 x alarm output / 1 x RS485
Installation Options Supports surface box and flush box mount
Internal MicroSD Slot Yes, up to 64GB
Keypad N/A
Low-Light Application Infrared
Main Processor Embedded Microprocessor
Max. Additional Door Stations 20
Max. Indoor Monitors 10
Power Consumption <12W
Power Input 12VDC 1A / PoE (802.3af)
Series G Series
Tamper Detection Yes
Vandal Resistant IK07
Weight 0.35kg
Warranty (Years) 4