Residential PoE IP Intercom Door Station (Gen2)
Model:INTIPRDSG-GEN2
Overview
This model refers to the Gen2 version of the INTIPRDSG. This model is listed for product support purposes only. For new installations, please refer to the latest INTIPRDSG page which lists the Gen3 model.
The INTIPRDSG (Gen2) is a single channel video intercom solution ideal for homes and single-premises buildings. This door station features a 2.0MP camera, all in a stylish aluminium weather and vandal resistant body.
Product features:
• 1/2.8’’ 2.0MP 1.95mm lens camera with 160° FOV
• Built-in microphone and speaker for 2-way talk
• Connect with intercom monitor(s) via Ethernet
• Alarm and RS485 input/output relays
• Intuitive, easy-to-use interface
• Weather and vandal resistant IP55/IK07 aluminium body
• Power via 12VDC or Power over Ethernet (802.3af)
• Flush and surface mount installation options
* We recommended that Door Stations are mounted in a sheltered location, not exposed directly to weather, as only the front plate is weather resistant.
* When installing the Door Station, apply outdoor silicone sealant between the Door Station & the wall, & seal the hole that has been created for the cable to prevent water ingress. If using a mounting box, ensure the box is sealed, & the included waterproof rubber seals are used when installing the screws.
*2-Wire connection requires the INTIPPOE2W. Note it is one device per terminal (6 total).
The INTIPRDSG (Gen2) is a single channel video intercom solution ideal for homes and single-premises buildings. This door station features a 2.0MP camera, all in a stylish aluminium weather and vandal resistant body.
Product features:
• 1/2.8’’ 2.0MP 1.95mm lens camera with 160° FOV
• Built-in microphone and speaker for 2-way talk
• Connect with intercom monitor(s) via Ethernet
• Alarm and RS485 input/output relays
• Intuitive, easy-to-use interface
• Weather and vandal resistant IP55/IK07 aluminium body
• Power via 12VDC or Power over Ethernet (802.3af)
• Flush and surface mount installation options
* We recommended that Door Stations are mounted in a sheltered location, not exposed directly to weather, as only the front plate is weather resistant.
* When installing the Door Station, apply outdoor silicone sealant between the Door Station & the wall, & seal the hole that has been created for the cable to prevent water ingress. If using a mounting box, ensure the box is sealed, & the included waterproof rubber seals are used when installing the screws.
*2-Wire connection requires the INTIPPOE2W. Note it is one device per terminal (6 total).
| Specifications | |
|---|---|
| App Connection | QR Code |
| Audio / 2-Way Talk | Omni-directional Microphone & Embedded Loudspeaker for 2-way talk |
| Button Illumination | None |
| Camera System | 2.0 Megapixel CMOS camera with 1.95mm lens (Horizontal FoV: 160°), WDR |
| Card Support | N/A |
| Construction | Aluminium |
| Dimensions | 130 x 96 x 29mm |
| Ethernet / Network | N/A |
| Ingress Protection | IP55 |
| Input / Output | 1 x alarm input / 1 x alarm output / 1 x RS485 |
| Installation Options | Supports surface box and flush box mount |
| Internal MicroSD Slot | Yes, up to 64GB |
| Keypad | N/A |
| Low-Light Application | Infrared |
| Main Processor | Embedded Microprocessor |
| Max. Additional Door Stations | 20 |
| Max. Indoor Monitors | 10 |
| Power Consumption | <12W |
| Power Input | 12VDC 1A / PoE (802.3af) |
| Series | G Series |
| Tamper Detection | Yes |
| Vandal Resistant | IK07 |
| Weight | 0.35kg |
| Warranty (Years) | 4 |